Here’s a breakdown of what’s included in my cheaper solar #meshtastic node. If you’d like to get one. Use promo code TikTok to get a discount!

So in the event that you purchase a solar node from me, specifically the cheaper option, this is what you get in your package. Starting off with the basics, you get an antenna tuned for 915 MHz, you get some antenna tape and what this does is it creates a nice seal between the end mount and the antenna. You get some brackets to put on the back of your node, if you choose to do that. This will allow you to screw it into a wall or whatever you want to do. I've actually even used them to attach little magnets like this to put on top of my car. You get a sticker, the orientation for your node. You don't really have to worry about that because everything is already done for you. Just make sure that everything lines up. USB cable, some zip ties. This is a custom printed bracket that goes on the back. So if you put this on a pole, this goes against the pole and then you can zip tie your whole bracket and the node to the pole. So the node itself, you get a 6 Watt solar panel that is attached with a custom bracket, goes through here. Now silicone and waterproof USB cable. Inside there is a mesh node. The mesh node is then connected to this battery here. You can take everything apart. I don't ship it with the battery connected because I don't like live things in transit and a very thin USB cable. So when you get this straight out of the box, you connect the USB cable to the solar panel. Before that, connect the antenna first. Connect the battery in this orientation right here. Very important. And then connect your solar panel. The pin is 123456 and the node comes updated to the latest firmware as of your order. Everything's packaged in a pretty box with a packaging slip that tells you that I love you because I do. Okay, bye.